Welding of niobium and tantalum materials is currently conducted in vacuum or inert gas chambers, which limits the size of the equipment to be produced. The objective of this study is to investigate the means to make TIG welding on these materials in atmospheric environment and analyse the effect of heat input on the properties of welds. It was found that it is possible to make TIG welds on these materials in atmospheric environment, provided that adequate protection is ensured on the face and root sides of welds. The increase of weld heat input coarsens the microstructure in melted and heat affected zones of both materials; increases also hardness in melted zones and tensile strength of welds, and there is not an obvious loss of ductility in heat affected zones.
array:23 [ "pii" => "S087083121730068X" "issn" => "08708312" "doi" => "10.1016/j.ctmat.2016.06.013" "estado" => "S300" "fechaPublicacion" => "2017-01-01" "aid" => "147" "copyright" => "Portuguese Society of Materials (SPM)" "copyrightAnyo" => "2017" "documento" => "article" "crossmark" => 1 "subdocumento" => "fla" "cita" => "Cienc Tecnol Mater. 2017;29:e51-5" "abierto" => array:3 [ "ES" => false "ES2" => false "LATM" => false ] "gratuito" => false "lecturas" => array:2 [ "total" => 37 "PDF" => 37 ] "itemSiguiente" => array:18 [ "pii" => "S0870831217300691" "issn" => "08708312" "doi" => "10.1016/j.ctmat.2016.07.015" "estado" => "S300" "fechaPublicacion" => "2017-01-01" "aid" => "148" "copyright" => "Portuguese Society of Materials (SPM)" "documento" => "article" "crossmark" => 1 "subdocumento" => "fla" "cita" => "Cienc Tecnol Mater. 2017;29:e56-61" "abierto" => array:3 [ "ES" => false "ES2" => false "LATM" => false ] "gratuito" => false "lecturas" => array:2 [ "total" => 25 "formatos" => array:2 [ "HTML" => 1 "PDF" => 24 ] ] "en" => array:9 [ "idiomaDefecto" => true "titulo" => "Residual stress field and distortions resulting from welding processes: numerical modelling using Sysweld" "tienePdf" => "en" "tieneTextoCompleto" => 0 "tieneResumen" => "en" "paginas" => array:1 [ 0 => array:2 [ "paginaInicial" => "e56" "paginaFinal" => "e61" ] ] "contieneResumen" => array:1 [ "en" => true ] "contienePdf" => array:1 [ "en" => true ] "autores" => array:1 [ 0 => array:2 [ "autoresLista" => "Tiago R. Lima, Sérgio M.O. Tavares, Paulo M.S.T. de Castro" "autores" => array:3 [ 0 => array:2 [ "nombre" => "Tiago R." "apellidos" => "Lima" ] 1 => array:2 [ "nombre" => "Sérgio M.O." "apellidos" => "Tavares" ] 2 => array:2 [ "nombre" => "Paulo M.S.T." "apellidos" => "de Castro" ] ] ] ] ] "idiomaDefecto" => "en" "EPUB" => "https://multimedia.elsevier.es/PublicationsMultimediaV1/item/epub/S0870831217300691?idApp=UINPBA00004N" "url" => "/08708312/0000002900000001/v4_201801061051/S0870831217300691/v4_201801061051/en/main.assets" ] "itemAnterior" => array:18 [ "pii" => "S0870831217300678" "issn" => "08708312" "doi" => "10.1016/j.ctmat.2016.06.012" "estado" => "S300" "fechaPublicacion" => "2017-01-01" "aid" => "146" "copyright" => "Portuguese Society of Materials (SPM)" "documento" => "article" "crossmark" => 1 "subdocumento" => "fla" "cita" => "Cienc Tecnol Mater. 2017;29:e46-50" "abierto" => array:3 [ "ES" => false "ES2" => false "LATM" => false ] "gratuito" => false "lecturas" => array:2 [ "total" => 25 "PDF" => 25 ] "en" => array:9 [ "idiomaDefecto" => true "titulo" => "Effect of explosive ratio on explosive welding quality of copper to aluminium" "tienePdf" => "en" "tieneTextoCompleto" => 0 "tieneResumen" => "en" "paginas" => array:1 [ 0 => array:2 [ "paginaInicial" => "e46" "paginaFinal" => "e50" ] ] "contieneResumen" => array:1 [ "en" => true ] "contienePdf" => array:1 [ "en" => true ] "autores" => array:1 [ 0 => array:2 [ "autoresLista" => "A. Loureiro, R. Mendes, J.B. Ribeiro, R.M. Leal" "autores" => array:4 [ 0 => array:2 [ "nombre" => "A." "apellidos" => "Loureiro" ] 1 => array:2 [ "nombre" => "R." "apellidos" => "Mendes" ] 2 => array:2 [ "nombre" => "J.B." "apellidos" => "Ribeiro" ] 3 => array:2 [ "nombre" => "R.M." "apellidos" => "Leal" ] ] ] ] ] "idiomaDefecto" => "en" "EPUB" => "https://multimedia.elsevier.es/PublicationsMultimediaV1/item/epub/S0870831217300678?idApp=UINPBA00004N" "url" => "/08708312/0000002900000001/v4_201801061051/S0870831217300678/v4_201801061051/en/main.assets" ] "en" => array:11 [ "idiomaDefecto" => true "titulo" => "Effect of heat input on microstructure and strength of welds in tantalum and niobium alloys" "tieneTextoCompleto" => 0 "paginas" => array:1 [ 0 => array:2 [ "paginaInicial" => "e51" "paginaFinal" => "e55" ] ] "autores" => array:1 [ 0 => array:4 [ "autoresLista" => "M. Bexiga, A. Tavares, F. Melo, A. Loureiro" "autores" => array:4 [ 0 => array:3 [ "nombre" => "M." "apellidos" => "Bexiga" "referencia" => array:1 [ 0 => array:2 [ "etiqueta" => "<span class="elsevierStyleSup">a</span>" "identificador" => "aff0005" ] ] ] 1 => array:3 [ "nombre" => "A." "apellidos" => "Tavares" "referencia" => array:1 [ 0 => array:2 [ "etiqueta" => "<span class="elsevierStyleSup">a</span>" "identificador" => "aff0005" ] ] ] 2 => array:3 [ "nombre" => "F." "apellidos" => "Melo" "referencia" => array:1 [ 0 => array:2 [ "etiqueta" => "<span class="elsevierStyleSup">a</span>" "identificador" => "aff0005" ] ] ] 3 => array:4 [ "nombre" => "A." "apellidos" => "Loureiro" "email" => array:1 [ 0 => "altino.loureiro@dem.uc.pt" ] "referencia" => array:2 [ 0 => array:2 [ "etiqueta" => "<span class="elsevierStyleSup">b</span>" "identificador" => "aff0010" ] 1 => array:2 [ "etiqueta" => "<span class="elsevierStyleSup">*</span>" "identificador" => "cor0005" ] ] ] ] "afiliaciones" => array:2 [ 0 => array:3 [ "entidad" => "ARSOPI – Indústrias Metalúrgicas Arlindo S. Pinho, S.A., Relva - Vila Chã 3730-954 Vale de Cambra, Portugal" "etiqueta" => "a" "identificador" => "aff0005" ] 1 => array:3 [ "entidad" => "CEMUC – Department of Mechanical Engineering, University of Coimbra, Rua Luis Reis Santos, 3030-788 Coimbra, Portugal" "etiqueta" => "b" "identificador" => "aff0010" ] ] "correspondencia" => array:1 [ 0 => array:3 [ "identificador" => "cor0005" "etiqueta" => "⁎" "correspondencia" => "Corresponding author." ] ] ] ] "pdfFichero" => "main.pdf" "tienePdf" => true "PalabrasClave" => array:1 [ "en" => array:1 [ 0 => array:4 [ "clase" => "keyword" "titulo" => "Keywords" "identificador" => "xpalclavsec936332" "palabras" => array:5 [ 0 => "Weld heat-input" 1 => "tantalum" 2 => "niobium" 3 => "microstructure" 4 => "tensile strength" ] ] ] ] "tieneResumen" => true "resumen" => array:1 [ "en" => array:2 [ "titulo" => "Abstract" "resumen" => "<span id="abst0005" class="elsevierStyleSection elsevierViewall"><p id="spar0005" class="elsevierStyleSimplePara elsevierViewall">Welding of niobium and tantalum materials is currently conducted in vacuum or inert gas chambers, which limits the size of the equipment to be produced. The objective of this study is to investigate the means to make TIG welding on these materials in atmospheric environment and analyse the effect of heat input on the properties of welds. It was found that it is possible to make TIG welds on these materials in atmospheric environment, provided that adequate protection is ensured on the face and root sides of welds. The increase of weld heat input coarsens the microstructure in melted and heat affected zones of both materials; increases also hardness in melted zones and tensile strength of welds, and there is not an obvious loss of ductility in heat affected zones.</p></span>" ] ] "bibliografia" => array:2 [ "titulo" => "References" "seccion" => array:1 [ 0 => array:2 [ "identificador" => "bibs0005" "bibliografiaReferencia" => array:10 [ 0 => array:3 [ "identificador" => "bib0005" "etiqueta" => "[1]" "referencia" => array:1 [ 0 => array:2 [ "contribucion" => array:1 [ 0 => array:1 [ "autores" => array:1 [ 0 => array:2 [ "etal" => false "autores" => array:7 [ 0 => "J. Hossick-Schott" 1 => "M. Reiterer" 2 => "J. Heffelfinger" 3 => "M. Hintz" 4 => "M. Ringle" 5 => "I. Levina" 6 => "K. Gaffney" ] ] ] ] ] "host" => array:1 [ 0 => array:1 [ "Revista" => array:5 [ "tituloSerie" => "JOM" "fecha" => "2013" "volumen" => "65" "numero" => "5" "paginaInicial" => "625" ] ] ] ] ] ] 1 => array:3 [ "identificador" => "bib0010" "etiqueta" => "[2]" "referencia" => array:1 [ 0 => array:1 [ "host" => array:1 [ 0 => array:1 [ "Libro" => array:2 [ "fecha" => "1993" "editorial" => "ASM International" ] ] ] ] ] ] 2 => array:3 [ "identificador" => "bib0015" "etiqueta" => "[3]" "referencia" => array:1 [ 0 => array:2 [ "contribucion" => array:1 [ 0 => array:1 [ "autores" => array:1 [ 0 => array:2 [ "etal" => false "autores" => array:4 [ 0 => "R. Rai" 1 => "J.W. Elmer" 2 => "T.A. Palmer" 3 => "T. DebRoy" ] ] ] ] ] "host" => array:1 [ 0 => array:1 [ "Revista" => array:4 [ "tituloSerie" => "J. Phys. D: Appl. Phys." "fecha" => "2007" "volumen" => "40" "paginaInicial" => "5753" ] ] ] ] ] ] 3 => array:3 [ "identificador" => "bib0020" "etiqueta" => "[4]" "referencia" => array:1 [ 0 => array:1 [ "referenciaCompleta" => "T.A. Palmer, J.W. Elmer, R. Pong, M.D. Gauthier, Lawrence Livermore National Laboratory, UCRL-TR- 222245 (2006)." ] ] ] 4 => array:3 [ "identificador" => "bib0025" "etiqueta" => "[5]" "referencia" => array:1 [ 0 => array:1 [ "referenciaCompleta" => "K.E. Hays, T.E. Tietz, AD 654150, B-70-67-18, Lockheed Palo Alto Research Laboratory (1967)." ] ] ] 5 => array:3 [ "identificador" => "bib0030" "etiqueta" => "[6]" "referencia" => array:1 [ 0 => array:2 [ "contribucion" => array:1 [ 0 => array:1 [ "autores" => array:1 [ 0 => array:2 [ "etal" => false "autores" => array:3 [ 0 => "M.J. Torkamany" 1 => "F. Malek Ghaini" 2 => "R. Poursalehi" ] ] ] ] ] "host" => array:1 [ 0 => array:1 [ "Revista" => array:4 [ "tituloSerie" => "Mater. Des." "fecha" => "2014" "volumen" => "53" "paginaInicial" => "915" ] ] ] ] ] ] 6 => array:3 [ "identificador" => "bib0035" "etiqueta" => "[7]" "referencia" => array:1 [ 0 => array:2 [ "contribucion" => array:1 [ 0 => array:2 [ "titulo" => "Proceedings of Radiofrequency Superconductivity workshop 1984" "autores" => array:1 [ 0 => array:2 [ "etal" => false "autores" => array:2 [ 0 => "E. Chiaveri" 1 => "H. Lengeler" ] ] ] ] ] "host" => array:1 [ 0 => array:1 [ "Libro" => array:5 [ "fecha" => "1984 May 25-30" "paginaInicial" => "611" "paginaFinal" => "626" "editorial" => "Switzerland" "editorialLocalizacion" => "Geneva" ] ] ] ] ] ] 7 => array:3 [ "identificador" => "bib0040" "etiqueta" => "[8]" "referencia" => array:1 [ 0 => array:2 [ "contribucion" => array:1 [ 0 => array:1 [ "autores" => array:1 [ 0 => array:2 [ "etal" => false "autores" => array:5 [ 0 => "H. Lim" 1 => "M.G. Lee" 2 => "J.H. Kim" 3 => "B.L. Adams" 4 => "R.H. Wagoner" ] ] ] ] ] "host" => array:1 [ 0 => array:1 [ "Revista" => array:5 [ "tituloSerie" => "Int. J. Plast." "fecha" => "2011" "volumen" => "27" "numero" => "9" "paginaInicial" => "1328" ] ] ] ] ] ] 8 => array:3 [ "identificador" => "bib0045" "etiqueta" => "[9]" "referencia" => array:1 [ 0 => array:2 [ "contribucion" => array:1 [ 0 => array:2 [ "titulo" => "Proceedings of the International Institute of Welding Congress on Joining Research" "autores" => array:1 [ 0 => array:2 [ "etal" => false "autores" => array:1 [ 0 => "T. Kuwana" ] ] ] ] ] "host" => array:1 [ 0 => array:1 [ "Libro" => array:4 [ "fecha" => "1990 July 20-21" "paginaInicial" => "117" "editorial" => "Canada" "editorialLocalizacion" => "Montreal" ] ] ] ] ] ] 9 => array:3 [ "identificador" => "bib0050" "etiqueta" => "[10]" "referencia" => array:1 [ 0 => array:2 [ "contribucion" => array:1 [ 0 => array:2 [ "titulo" => "Proceedings of IAEA-TECDOC-421" "autores" => array:1 [ 0 => array:2 [ "etal" => false "autores" => array:6 [ 0 => "H. Chauve" 1 => "J. Decours" 2 => "R. Demay" 3 => "M. Pelras" 4 => "J. Simonnet" 5 => "G. Turluer" ] ] ] ] ] "host" => array:1 [ 0 => array:1 [ "Libro" => array:5 [ "fecha" => "1986 September 2-5" "paginaInicial" => "165" "paginaFinal" => "192" "editorial" => "Austria" "editorialLocalizacion" => "Vienna" ] ] ] ] ] ] ] ] ] ] ] "idiomaDefecto" => "en" "url" => "/08708312/0000002900000001/v4_201801061051/S087083121730068X/v4_201801061051/en/main.assets" "Apartado" => null "PDF" => "https://static.elsevier.es/multimedia/08708312/0000002900000001/v4_201801061051/S087083121730068X/v4_201801061051/en/main.pdf?idApp=UINPBA00004N&text.app=https://www.elsevier.es/" "EPUB" => "https://multimedia.elsevier.es/PublicationsMultimediaV1/item/epub/S087083121730068X?idApp=UINPBA00004N" ]