With the constant need to improve and make the production of asphalt mixtures more sustainable, new production techniques have been developed, the implementation of which implies the correct knowledge of their performance. One of the most promising asphalt production techniques is the use of foamed bitumen. However, it is essential to understand how this binder will behave when subjected to the expansion process. The loss of volume of the foamed bitumen could be translated by a decay curve, which allows to determine the ideal temperature and water content added to the bitumen in order to assure adequate conditions to the mix the bitumen with the aggregates. On the present study, a conventional 160/220 pen grade bitumen was tested by using different temperatures and water contents, and it was concluded that the optimum temperature for the production of foamed bitumen (with the studied bitumen) is 150°C, which corresponds to a viscosity of 0.1Pa.s. The water content mostly influence the half-life of the bitumen foam, resulting in quicker volume reductions for higher water contents.
array:23 [ "pii" => "S0870831217300319" "issn" => "08708312" "doi" => "10.1016/j.ctmat.2016.07.004" "estado" => "S300" "fechaPublicacion" => "2017-01-01" "aid" => "110" "copyright" => "Portuguese Society of Materials (SPM)" "copyrightAnyo" => "2017" "documento" => "article" "crossmark" => 1 "subdocumento" => "fla" "cita" => "Cienc Tecnol Mater. 2017;29:e198-203" "abierto" => array:3 [ "ES" => false "ES2" => false "LATM" => false ] "gratuito" => false "lecturas" => array:2 [ "total" => 18 "formatos" => array:2 [ "HTML" => 1 "PDF" => 17 ] ] "itemSiguiente" => array:18 [ "pii" => "S0870831217300307" "issn" => "08708312" "doi" => "10.1016/j.ctmat.2016.07.003" "estado" => "S300" "fechaPublicacion" => "2017-01-01" "aid" => "109" "copyright" => "Portuguese Society of Materials (SPM)" "documento" => "article" "crossmark" => 1 "subdocumento" => "fla" "cita" => "Cienc Tecnol Mater. 2017;29:e204-9" "abierto" => array:3 [ "ES" => false "ES2" => false "LATM" => false ] "gratuito" => false "lecturas" => array:2 [ "total" => 19 "PDF" => 19 ] "en" => array:9 [ "idiomaDefecto" => true "titulo" => "Effect of incorporating different waste materials in bitumen" "tienePdf" => "en" "tieneTextoCompleto" => 0 "tieneResumen" => "en" "paginas" => array:1 [ 0 => array:2 [ "paginaInicial" => "e204" "paginaFinal" => "e209" ] ] "contieneResumen" => array:1 [ "en" => true ] "contienePdf" => array:1 [ "en" => true ] "autores" => array:1 [ 0 => array:2 [ "autoresLista" => "Sara Fernandes, Liliana Costa, Hugo Silva, Joel Oliveira" "autores" => array:4 [ 0 => array:2 [ "nombre" => "Sara" "apellidos" => "Fernandes" ] 1 => array:2 [ "nombre" => "Liliana" "apellidos" => "Costa" ] 2 => array:2 [ "nombre" => "Hugo" "apellidos" => "Silva" ] 3 => array:2 [ "nombre" => "Joel" "apellidos" => "Oliveira" ] ] ] ] ] "idiomaDefecto" => "en" "EPUB" => "https://multimedia.elsevier.es/PublicationsMultimediaV1/item/epub/S0870831217300307?idApp=UINPBA00004N" "url" => "/08708312/0000002900000001/v4_201801061051/S0870831217300307/v4_201801061051/en/main.assets" ] "itemAnterior" => array:18 [ "pii" => "S0870831217300496" "issn" => "08708312" "doi" => "10.1016/j.ctmat.2016.04.005" "estado" => "S300" "fechaPublicacion" => "2017-01-01" "aid" => "128" "copyright" => "Portuguese Society of Materials (SPM)" "documento" => "article" "crossmark" => 1 "subdocumento" => "fla" "cita" => "Cienc Tecnol Mater. 2017;29:e192-7" "abierto" => array:3 [ "ES" => false "ES2" => false "LATM" => false ] "gratuito" => false "lecturas" => array:2 [ "total" => 26 "formatos" => array:2 [ "HTML" => 3 "PDF" => 23 ] ] "en" => array:9 [ "idiomaDefecto" => true "titulo" => "Study of the interaction between asphalt and recycled plastics in new polymer modified binders (PMB)" "tienePdf" => "en" "tieneTextoCompleto" => 0 "tieneResumen" => "en" "paginas" => array:1 [ 0 => array:2 [ "paginaInicial" => "e192" "paginaFinal" => "e197" ] ] "contieneResumen" => array:1 [ "en" => true ] "contienePdf" => array:1 [ "en" => true ] "autores" => array:1 [ 0 => array:2 [ "autoresLista" => "Liliana Costa, Sara Fernandes, Hugo Silva, Joel Oliveira" "autores" => array:4 [ 0 => array:2 [ "nombre" => "Liliana" "apellidos" => "Costa" ] 1 => array:2 [ "nombre" => "Sara" "apellidos" => "Fernandes" ] 2 => array:2 [ "nombre" => "Hugo" "apellidos" => "Silva" ] 3 => array:2 [ "nombre" => "Joel" "apellidos" => "Oliveira" ] ] ] ] ] "idiomaDefecto" => "en" "EPUB" => "https://multimedia.elsevier.es/PublicationsMultimediaV1/item/epub/S0870831217300496?idApp=UINPBA00004N" "url" => "/08708312/0000002900000001/v4_201801061051/S0870831217300496/v4_201801061051/en/main.assets" ] "en" => array:11 [ "idiomaDefecto" => true "titulo" => "Foamed bitumen: an alternative way of producing asphalt mixtures" "tieneTextoCompleto" => 0 "paginas" => array:1 [ 0 => array:2 [ "paginaInicial" => "e198" "paginaFinal" => "e203" ] ] "autores" => array:1 [ 0 => array:4 [ "autoresLista" => "Liliana Abreu, Joel Oliveira, Hugo Silva, Catarina Silva, Daniela Palha, Paulo Fonseca" "autores" => array:6 [ 0 => array:4 [ "nombre" => "Liliana" "apellidos" => "Abreu" "email" => array:1 [ 0 => "id4217@alunos.uminho.pt" ] "referencia" => array:2 [ 0 => array:2 [ "etiqueta" => "<span class="elsevierStyleSup">a</span>" "identificador" => "aff0005" ] 1 => array:2 [ "etiqueta" => "<span class="elsevierStyleSup">*</span>" "identificador" => "cor0005" ] ] ] 1 => array:3 [ "nombre" => "Joel" "apellidos" => "Oliveira" "referencia" => array:1 [ 0 => array:2 [ "etiqueta" => "<span class="elsevierStyleSup">b</span>" "identificador" => "aff0010" ] ] ] 2 => array:3 [ "nombre" => "Hugo" "apellidos" => "Silva" "referencia" => array:1 [ 0 => array:2 [ "etiqueta" => "<span class="elsevierStyleSup">b</span>" "identificador" => "aff0010" ] ] ] 3 => array:3 [ "nombre" => "Catarina" "apellidos" => "Silva" "referencia" => array:1 [ 0 => array:2 [ "etiqueta" => "<span class="elsevierStyleSup">a</span>" "identificador" => "aff0005" ] ] ] 4 => array:3 [ "nombre" => "Daniela" "apellidos" => "Palha" "referencia" => array:1 [ 0 => array:2 [ "etiqueta" => "<span class="elsevierStyleSup">c</span>" "identificador" => "aff0015" ] ] ] 5 => array:3 [ "nombre" => "Paulo" "apellidos" => "Fonseca" "referencia" => array:1 [ 0 => array:2 [ "etiqueta" => "<span class="elsevierStyleSup">c</span>" "identificador" => "aff0015" ] ] ] ] "afiliaciones" => array:3 [ 0 => array:3 [ "entidad" => "Department of Civil Engineering (DEC), University of Minho, Guimarães 4800-058, Portugal" "etiqueta" => "a" "identificador" => "aff0005" ] 1 => array:3 [ "entidad" => "Centre for Territory, Environment and Construction (CTAC), University of Minho, Guimarães 4800-058, Portugal" "etiqueta" => "b" "identificador" => "aff0010" ] 2 => array:3 [ "entidad" => "Elevogroup, MonteAdriano Engenharia e Construção, Porto 4250-311, Portugal" "etiqueta" => "c" "identificador" => "aff0015" ] ] "correspondencia" => array:1 [ 0 => array:3 [ "identificador" => "cor0005" "etiqueta" => "⁎" "correspondencia" => "Corresponding author." ] ] ] ] "pdfFichero" => "main.pdf" "tienePdf" => true "PalabrasClave" => array:1 [ "en" => array:1 [ 0 => array:4 [ "clase" => "keyword" "titulo" => "Keywords" "identificador" => "xpalclavsec936311" "palabras" => array:4 [ 0 => "Warm mix asphalt" 1 => "foamed bitumen" 2 => "asphalt mixtures" 3 => "bitumen foaming characteristics" ] ] ] ] "tieneResumen" => true "resumen" => array:1 [ "en" => array:2 [ "titulo" => "Abstract" "resumen" => "<span id="abst0005" class="elsevierStyleSection elsevierViewall"><p id="spar0005" class="elsevierStyleSimplePara elsevierViewall">With the constant need to improve and make the production of asphalt mixtures more sustainable, new production techniques have been developed, the implementation of which implies the correct knowledge of their performance. One of the most promising asphalt production techniques is the use of foamed bitumen. However, it is essential to understand how this binder will behave when subjected to the expansion process. The loss of volume of the foamed bitumen could be translated by a decay curve, which allows to determine the ideal temperature and water content added to the bitumen in order to assure adequate conditions to the mix the bitumen with the aggregates. On the present study, a conventional 160/220 pen grade bitumen was tested by using different temperatures and water contents, and it was concluded that the optimum temperature for the production of foamed bitumen (with the studied bitumen) is 150<span class="elsevierStyleHsp" style=""></span>°C, which corresponds to a viscosity of 0.1<span class="elsevierStyleHsp" style=""></span>Pa.s. The water content mostly influence the half-life of the bitumen foam, resulting in quicker volume reductions for higher water contents.</p></span>" ] ] "bibliografia" => array:2 [ "titulo" => "References" "seccion" => array:1 [ 0 => array:2 [ "identificador" => "bibs0005" "bibliografiaReferencia" => array:15 [ 0 => array:3 [ "identificador" => "bib0005" "etiqueta" => "[1]" "referencia" => array:1 [ 0 => array:2 [ "contribucion" => array:1 [ 0 => array:1 [ "autores" => array:1 [ 0 => array:2 [ "etal" => false "autores" => array:4 [ 0 => "L.P.F. Abreu" 1 => "J.R.M. Oliveira" 2 => "H.M.R.D. Silva" 3 => "P.V. Fonseca" ] ] ] ] ] "host" => array:1 [ 0 => array:1 [ "Revista" => array:4 [ "tituloSerie" => "Constr. Build. Mater" "fecha" => "2015" "volumen" => "84" "paginaInicial" => "230" ] ] ] ] ] ] 1 => array:3 [ "identificador" => "bib0010" "etiqueta" => "[2]" "referencia" => array:1 [ 0 => array:2 [ "contribucion" => array:1 [ 0 => array:2 [ "titulo" => "Proceedings of 2nd International Conference - WASTES: solutions, treatments, opportunities" "autores" => array:1 [ 0 => array:2 [ "etal" => false "autores" => array:5 [ 0 => "D. Palha" 1 => "P. Fonseca" 2 => "L.P.F. Abreu" 3 => "J.R.M. Oliveira" 4 => "H.M.R.D. Silva" ] ] ] ] ] "host" => array:1 [ 0 => array:1 [ "Libro" => array:3 [ "fecha" => "2013 September 11-13" "editorial" => "Braga" "editorialLocalizacion" => "Portugal" ] ] ] ] ] ] 2 => array:3 [ "identificador" => "bib0015" "etiqueta" => "[3]" "referencia" => array:1 [ 0 => array:2 [ "contribucion" => array:1 [ 0 => array:2 [ "titulo" => "- European Asphalt Pavement Association" "autores" => array:1 [ 0 => array:2 [ "colaboracion" => "EAPA" "etal" => false ] ] ] ] "host" => array:1 [ 0 => array:1 [ "Libro" => array:4 [ "titulo" => "The use of warm mix asphalt" "fecha" => "2010" "editorial" => "Brussels" "editorialLocalizacion" => "Belgium" ] ] ] ] ] ] 3 => array:3 [ "identificador" => "bib0020" "etiqueta" => "[4]" "referencia" => array:1 [ 0 => array:2 [ "contribucion" => array:1 [ 0 => array:1 [ "autores" => array:1 [ 0 => array:2 [ "etal" => false "autores" => array:4 [ 0 => "M. Zaumanis" 1 => "V. Haritonovs" 2 => "G. Brencis" 3 => "J. Smirnovs" ] ] ] ] ] "host" => array:1 [ 0 => array:1 [ "Revista" => array:4 [ "tituloSerie" => "Constr. Sci." "fecha" => "2012" "volumen" => "13" "paginaInicial" => "6" ] ] ] ] ] ] 4 => array:3 [ "identificador" => "bib0025" "etiqueta" => "[5]" "referencia" => array:1 [ 0 => array:2 [ "contribucion" => array:1 [ 0 => array:2 [ "titulo" => "Warm-Mix Asphalt: European Practice" "autores" => array:1 [ 0 => array:2 [ "etal" => false "autores" => array:13 [ 0 => "J. D’Angelo" 1 => "E. Harm" 2 => "J. Bartoszek" 3 => "G. Baumgardner" 4 => "M. Corrigan" 5 => "J. Cowsert" 6 => "T. Harman" 7 => "M. Jamshidi" 8 => "W. Jones" 9 => "D. Newcomb" 10 => "B. Prowell" 11 => "R. Sines" 12 => "B. Yeaton" ] ] ] ] ] "host" => array:1 [ 0 => array:1 [ "Libro" => array:3 [ "fecha" => "2008" "editorial" => "Federal Highway Administration" "editorialLocalizacion" => "Washington, D.C., USA" ] ] ] ] ] ] 5 => array:3 [ "identificador" => "bib0030" "etiqueta" => "[6]" "referencia" => array:1 [ 0 => array:2 [ "contribucion" => array:1 [ 0 => array:1 [ "autores" => array:1 [ 0 => array:2 [ "etal" => false "autores" => array:4 [ 0 => "M.C. Rubio" 1 => "G. Martínez" 2 => "L. Baena" 3 => "F. Moreno" ] ] ] ] ] "host" => array:1 [ 0 => array:1 [ "Revista" => array:4 [ "tituloSerie" => "J. Cleaner Prod." "fecha" => "2012" "volumen" => "24" "paginaInicial" => "76" ] ] ] ] ] ] 6 => array:3 [ "identificador" => "bib0035" "etiqueta" => "[7]" "referencia" => array:1 [ 0 => array:2 [ "contribucion" => array:1 [ 0 => array:1 [ "autores" => array:1 [ 0 => array:2 [ "etal" => false "autores" => array:6 [ 0 => "A. Ali" 1 => "A. Abbas" 2 => "M. Nazzal" 3 => "A. Alhasan" 4 => "A. Roy" 5 => "D. Powers" ] ] ] ] ] "host" => array:1 [ 0 => array:1 [ "Revista" => array:4 [ "tituloSerie" => "Constr. Build. Mater" "fecha" => "2013" "volumen" => "48" "paginaInicial" => "1058" ] ] ] ] ] ] 7 => array:3 [ "identificador" => "bib0040" "etiqueta" => "[8]" "referencia" => array:1 [ 0 => array:2 [ "contribucion" => array:1 [ 0 => array:2 [ "titulo" => "PhD thesis" "autores" => array:1 [ 0 => array:2 [ "etal" => false "autores" => array:1 [ 0 => "K.J. Jenkins" ] ] ] ] ] "host" => array:1 [ 0 => array:1 [ "Libro" => array:4 [ "titulo" => "Faculty of Engineering" "fecha" => "2000" "editorial" => "University of Stellenbosch" "editorialLocalizacion" => "Stellenbosch, South Africa" ] ] ] ] ] ] 8 => array:3 [ "identificador" => "bib0045" "etiqueta" => "[9]" "referencia" => array:1 [ 0 => array:2 [ "contribucion" => array:1 [ 0 => array:2 [ "titulo" => "PhD thesis" "autores" => array:1 [ 0 => array:2 [ "etal" => false "autores" => array:1 [ 0 => "S. Sunarjono" ] ] ] ] ] "host" => array:1 [ 0 => array:1 [ "Libro" => array:4 [ "titulo" => "School of Civil Engineering - Nottingham Transportation Engineering Centre" "fecha" => "2008" "editorial" => "University of Nottingham" "editorialLocalizacion" => "UK" ] ] ] ] ] ] 9 => array:3 [ "identificador" => "bib0050" "etiqueta" => "[10]" "referencia" => array:1 [ 0 => array:2 [ "contribucion" => array:1 [ 0 => array:2 [ "titulo" => "Licentiate thesis, Division of Highway and Railway Engineering" "autores" => array:1 [ 0 => array:2 [ "etal" => false "autores" => array:1 [ 0 => "M. Namutebi" ] ] ] ] ] "host" => array:1 [ 0 => array:1 [ "Libro" => array:4 [ "titulo" => "School of Architecture and the Built Environment - Royal Institute of Technology" "fecha" => "2011" "editorial" => "Stockholm" "editorialLocalizacion" => "Sweden" ] ] ] ] ] ] 10 => array:3 [ "identificador" => "bib0055" "etiqueta" => "[11]" "referencia" => array:1 [ 0 => array:2 [ "contribucion" => array:1 [ 0 => array:1 [ "titulo" => "Wirtgen, Suitability test procedures of foam bitumen using Wirtgen WLB 10 S" ] ] "host" => array:1 [ 0 => array:1 [ "Libro" => array:2 [ "fecha" => "2008" "editorial" => "Germany" ] ] ] ] ] ] 11 => array:3 [ "identificador" => "bib0060" "etiqueta" => "[12]" "referencia" => array:1 [ 0 => array:2 [ "contribucion" => array:1 [ 0 => array:2 [ "titulo" => "- Bitumen and bituminous binders. Determination of needle penetration" "autores" => array:1 [ 0 => array:2 [ "colaboracion" => "CEN, EN 1426:2007" "etal" => false ] ] ] ] "host" => array:1 [ 0 => array:1 [ "Libro" => array:4 [ "titulo" => "European Committee for Standardization" "fecha" => "2007" "editorial" => "Brussels" "editorialLocalizacion" => "Belgium" ] ] ] ] ] ] 12 => array:3 [ "identificador" => "bib0065" "etiqueta" => "[13]" "referencia" => array:1 [ 0 => array:2 [ "contribucion" => array:1 [ 0 => array:2 [ "titulo" => "- Bitumen and bituminous binders. Determination of the softening point. Ring and Ball method" "autores" => array:1 [ 0 => array:2 [ "colaboracion" => "CEN, EN 1427:2007" "etal" => false ] ] ] ] "host" => array:1 [ 0 => array:1 [ "Libro" => array:4 [ "titulo" => "European Committee for Standardization" "fecha" => "2007" "editorial" => "Brussels" "editorialLocalizacion" => "Belgium" ] ] ] ] ] ] 13 => array:3 [ "identificador" => "bib0070" "etiqueta" => "[14]" "referencia" => array:1 [ 0 => array:2 [ "contribucion" => array:1 [ 0 => array:2 [ "titulo" => "- Bitumen and bituminous binders. Determination of dynamic viscosity of bituminous binder using a rotating spindle apparatus" "autores" => array:1 [ 0 => array:2 [ "colaboracion" => "CEN, EN 13302:2010" "etal" => false ] ] ] ] "host" => array:1 [ 0 => array:1 [ "Libro" => array:4 [ "titulo" => "European Committee for Standardization" "fecha" => "2010" "editorial" => "Brussels" "editorialLocalizacion" => "Belgium" ] ] ] ] ] ] 14 => array:3 [ "identificador" => "bib0075" "etiqueta" => "[15]" "referencia" => array:1 [ 0 => array:2 [ "contribucion" => array:1 [ 0 => array:2 [ "titulo" => "- Methods of test for petroleum and its products. Bitumen and bituminous binders. Determination of complex shear modulus and phase angle. Dynamic Shear Rheometer (DSR)" "autores" => array:1 [ 0 => array:2 [ "colaboracion" => "CEN, EN 14770:2005" "etal" => false ] ] ] ] "host" => array:1 [ 0 => array:1 [ "Libro" => array:4 [ "titulo" => "European Committee for Standardization" "fecha" => "2005" "editorial" => "Brussels" "editorialLocalizacion" => "Belgium" ] ] ] ] ] ] ] ] ] ] ] "idiomaDefecto" => "en" "url" => "/08708312/0000002900000001/v4_201801061051/S0870831217300319/v4_201801061051/en/main.assets" "Apartado" => null "PDF" => "https://static.elsevier.es/multimedia/08708312/0000002900000001/v4_201801061051/S0870831217300319/v4_201801061051/en/main.pdf?idApp=UINPBA00004N&text.app=https://www.elsevier.es/" "EPUB" => "https://multimedia.elsevier.es/PublicationsMultimediaV1/item/epub/S0870831217300319?idApp=UINPBA00004N" ]