Información del artículo
Abstract
This work focus the development of aluminum silicon composites reinforced with carbon nanotubes.Several composites were obtained by a powder metallurgy route through hot pressing technique. The influence of different volume fraction of carbon nanotubes in metallurgical and mechanical properties of the composite was studied. Metallurgical evaluation was made by means of SEM/EDS for interface reaction between matrix and reinforcement and also reinforcement distribution in the matrix. Mechanical evaluation was made by tensile tests.
Keywords:
aluminum composites
metal matrix composites
carbon nanotube
El Texto completo está disponible en PDF
References
[1]
A. Esawi, K. Morsi.
Composites Part A, 38 (2007), pp. 646-650
[2]
R. Pérez-Bustamante, I. Estrada-Guel, W. Antúnez- Flores, M. Miki-Yoshida, P.J. Ferreira, R. Martínez- Sánchez.
J. Alloys Compd, 450 (2008), pp. 323-326
[3]
Y. Tang, H. Cong, R. Zhong, H.-M. Cheng.
Carbon, 42 (2004), pp. 3260-3262
[4]
Y. Feng, H.L. Yuan, M. Zhang.
Mater. Charact, 55 (2005), pp. 211-218
[5]
E.T. Thostenson, C. Li, T.-W. Chou.
Compos. Sci. Technol, 65 (2005), pp. 491-516
[6]
E.T. Thostenson, Z. Ren, T.-W. Chou.
Compos. Sci. Technol, 61 (2001), pp. 1899-1912
[7]
C.L. Xu, B.Q. Wei, R.Z. Ma, J. Liang, X.K. Ma, D.H. Wu.
Carbon, 37 (1999), pp. 855-888
[8]
Y. Tang, H. Cong, R. Zhong, H.-M. Cheng.
Carbon, 42 (2004), pp. 3251-3272
[9]
D.S. Lim, D.H. You, H.-J. Choi, S.-H. Lim, H. Jang.
Wear, 259 (2005), pp. 539-544
[10]
R. George, K.T. Kashyap, R. Rahul, S. Yamdagni.
Scripta Mater, 5 (2005), pp. 1159-1163
[11]
A. Esawi, K. Morsi.
Composites Part A, 38 (2007), pp. 646-650
[12]
C.F. Deng, D.Z. Wang, X.X. Zhang, A.B. Li.
Mater. Sci. Eng. A, 444 (2007), pp. 138-145
[13]
R. Zhong, H. Cong, P. Hou.
Carbon, 41 (2003), pp. 848-851
[14]
K. Morsi, A. Esawi.
J. Mater. Sci, 42 (2007), pp. 4954-4959
[15]
T. Kuzumaki, O. Ujiie, H. Ichinose, K. Ito.
Adv. Eng. Mater, 2 (2000), pp. 416-418
[16]
E. Carreno-Morelli.
Dekker Encyclopedia of Nanoscience and Nanotechnology.
Taylor & Francis, (2006), pp. 1-9
[17]
S.R. Dong, J.P. Tu, X.B. Zhang.
Mater. Sci. Eng. A, 313 (2001), pp. 83-87
[18]
J.P. Tu, Y.Z. Yang, L.Y. Wang, X.C. Ma, X.B. Zhang.
Tribol. Lett, 10 (2001), pp. 225-228
[19]
K.T. Kim, S.I. Cha, S.H. Hong, S.H. Hong.
Mater. Sci. Eng. A, 430 (2006), pp. 27-33
[20]
H. Li, A. Misra, Y. Zhu, Z. Horita, C.C. Koch, T.G. Holesinger.
Mater. Sci. Eng. A, 523 (2009), pp. 60-64
[21]
E.E. Carreno-Morelli, J. Yang, R. Schaller, C. Bonjour.
European Powder Metallurgy Association: Shrewsbury UK, 2 (2003), pp. 59-62
[22]
A. Peigney, C. Laurent, E. Flahaut, A. Rousset.
Ceram. Int, 26 (2000), pp. 677-683
[23]
N. Darsono, D.-H. Yoon, J. Kim.
Appl. Surf. Sci., 254 (2008), pp. 3412-3419
[24]
Z. Tao, H. Geng, K. Yuc, Z. Yang, Y. Wang.
Mater.Lett, 58 (2004), pp. 3410-3413
[25]
A.M.K. Esawi, K. Morsi, A. Sayeda, A. Abdel Gawad, P. Borah.
Mater. Sci. Eng, A508 (2009), pp. 167-173
[26]
C. Deng, X.X. Zhang, D. Wang, Q. Lin, A. Li.
Mater. Lett, 61 (2007), pp. 1725-1728
[27]
T. Kuzumaki, K. Miyazawa, H. Ichinose.
Mater. Res, 13 (1998), pp. 2445-2449
Copyright © 2014. Sociedade Portuguesa de Materiais (SPM)
