Fracture behaviour of wood bonded joints under modes I and II by digital image correlation and fibre Bragg grating sensors

Información del artículo

Abstract

Direct identification of cohesive laws in modes I and II of wood bonded joints is addressed by the double cantilever beam (DCB) and end-notched flexure (ENF) tests, respectively. Moreover, the development and extension of fracture process zone (FPZ) ahead of the initial crack tip, is analysed by means of digital image correlation (DIC) and embedded fibre Bragg grating (FBG) sensors. From FBG spectral response, the spectrum geometric mean is determined and the strain induced by wavelength variation employed to identify the initial and final stages of the FPZ. These stages are used to consistently define the cohesive laws in both modes I and II. Resistance-curves are determined from the compliance-based beam method (CBBM). Besides, the crack tip opening displacements (CTOD) are determined by post-processing displacement field provided by DIC around the initial crack tip. The strain energy release rate as a function of the CTOD are then determined for both mode I and mode II. The respective cohesive laws are reconstructed by numerical approximation and differentiation. It is concluded that the proposed data reduction scheme is effective to determine both the FPZ development phase and the corresponding cohesive laws of wood bonded joints in both mode I and mode II.

Keywords:

wood

adhesion

mechanical testing

joints/joining

digital image correlation

fibre Bragg grating sensors.

El Texto completo está disponible en PDF

References

[1]

M. Elices, G.V. Guinea, J. Gomez, J. Planas.

Eng. Fract. Mech, 69 (2002), pp. 137

[2]

A. Needleman.

ASME J Appl.

Mech., 54 (1987),

[3]

M.F.S.F. de Moura, J.L. Morais, N. Dourado.

Eng. Fract. Mech, 75 (2008), pp. 978

[4]

F.G.A. Silva, J. Xavier, F.A.M. Pereira, J.J.L. Morais, N. Dourado, M.F.S.F. de Moura.

Holzforschung, 67 (2013), pp. 913

[5]

R.D.S.G. Campilho, M.D. Banea, J.A.B.P. Neto, L.F.M. da Silva.

J. Adhesion, 88 (2012), pp. 513

[6]

L. Andena, M. Rink, J.G. Williams.

Eng. Fract. Mech, 73 (2006), pp. 2476

[7]

V. Slowik, B. Villmann, N. Bretschneider, T. Villmann.

Comput. Method Appl. Me, 195 (2006), pp. 7223

[8]

B.F. Sørensen, E.K. Jacobsen.

Compos. Part A-Appl. S, 29 (1998), pp. 1443

[9]

G.F. Dias, M.F.S.F. de Moura, J.A.G. Chousal, J. Xavier.

Compos. Struct, 106 (2013), pp. 646

[10]

F. Silva, J. Morais, N. Dourado, J. Xavier, F.A.M. Pereira, M.F.S.F. de Moura.

Int. J. Adhes. Adhes, 51 (2014), pp. 54

[11]

R.M.R.P. Fernandes, J.A.G. Chousal, M.F.S.F. de Moura, J. Xavier.

Compos. Part B-Eng, 52 (2013), pp. 269

[12]

A.M.R. Sousa, J. Xavier, J.J.L. Morais, V.M.J. Filipe, M. Vaz.

Opt. Laser Eng, 49 (2011), pp. 1402

[13]

J. Xavier, A.M.R. Sousa, J.J.L. Morais, V.M.J. Filipe, M. Vaz.

Opt. Eng, 51 (2012), pp. 043602

[14]

J. Xavier, J. Oliveira, P. Monteiro, J.J.L. Morais, M.F.S.F. de Moura.

Exp. Mech, 54 (2014), pp. 829

[15]

S.P. Fernberg, L.A. Berglund.

Compos Sci. Technol, 61 (2001), pp. 2445

[16]

G.R. Irwin, J.A. Kies.

Weld Res. Suppl, 33 (1952), pp. 193

[17]

J.C. Xavier, N.M. Garrido, M. Oliveira, J.L. Morais, P.P. Camanho, F. Pierron.

Compos Part A-Appl. S., 35 (2004), pp. 827

[18]

J. Xavier, M. Oliveira, J. Morais, J. Pinto.

Holzforschung, 63 (2009), pp. 217

[19]

J. Xavier, S. Avril, F. Pierron, J. Morais.

Holzforschung, 61 (2007), pp. 573

[20]

J. Xavier, S. Avril, F. Pierron, J. Morais.

Compos Part A-Appl. S., 40 (2009), pp. 1953

[21]

J. Xavier, P. Monteiro, J. Morais, N. Dourado, M.F.S.F. de Moura.

J. Mater. Sci, 49 (2014), pp. 7371

[22]

G. Catalanotti, P.P. Camanho, J. Xavier, G. Dávila, A.T. Marques.

Compos. Sci. Technol, 70 (2010), pp. 1986

[23]

L.A. Carlsson, J.W. Gillespie, R.B. Pipes.

J. Compos. Mater, 20 (1986), pp. 594

[24]

M.F.S.F. de Moura, M.A.L. Silva, J.J.L. Morais, A.B. de Morais, J.J.L. Lousada.

Holzforschung, 63 (2009), pp. 99

[25]

B. Pan, K. Qian, H. Xie, A. Asundi.

Meas. Sci. Technol, 20 (2009), pp. 062001

[26]

ARAMIS, User Manual - Software - v6.0.2-6, 2009.

[27]

J. Xavier, A.M.P. de Jesus, J.J.L. Morais, J.M.T. Pinto.

Constr. Build. Mater, 26 (2012), pp. 207

[28]

A.M.R. Sousa, J. Xavier, M. Vaz, J.J.L. Morais, V.M.J. Filipe.

Strain, 47 (2011), pp. 87

[29]

N. Dourado, S. Morel, M.F.S.F. de Moura, G. Valentin, J. Morais.

Compos. Part A-Appl. S, 39 (2008), pp. 415

[30]

S. Stutz, J. Cugnoni, J. Botsis.

Eng. Fract. Mech, 78 (2011), pp. 890

[31]

R.S. Maciel, O. Frazão, J.J.L. Morais, J.R.A. Fernandes. Proc. SPIE 8785, 8th Ibero American Optics Meeting/11th Latin American Meeting on Optics, Lasers, and Applications, 8785FQ, 2013.

[32]

J. Jiang, T. Liu, K. Liu, Y. Zhang.

Opt. Eng, 51 (2012), pp. 034403

[33]

J. Botsis, L. Humbert, F. Colpo, P. Giaccari.

Optics Laser Eng., 43 (2005), pp. 491

[34]

J. Xavier, J.R.A. Fernandes, O. Frazão, J.J.L. Morais.

Compos. Struct, 121 (2015), pp. 83

Indexada en:

Síguenos:

Indexada en:

Síguenos:

Suscríbase a la newsletter