Información del artículo
RESUMEN
En este trabajo se evalúa el estado actual de la investigación sobre Lean Production y Gestión de la Cadena de Suministro en la industria aeronáutica con dos objetivos básicos: 1) identificar el conjunto de líneas de investigación desarrolladas, aportando un criterio de clasificación de la literatura, 2) discutir sobre la evidencia empírica, intentando proporcionar orientaciones para la investigación futura. Para el logro de estos objetivos se ha empleado una metodología de investigación consistente en la identificación y revisión de la literatura. El análisis sistemático posterior de ésta ha sido de naturaleza cualitativa. Este análisis ha permitido identificar tres líneas de investigación en torno a Lean Production y otras tres relacionadas con la Gestión de la Cadena de Suministro. Por último, se identifican nuevas oportunidades y retos a los que se enfrenta la investigación en un futuro.
CLASIFICACIÓN JEL:
M11
L23
PALABRAS CLAVE:
Industria Aeronáutica
Lean Production
Gestión de la Cadena de Suministro
Revisión de la Literatura
ABSTRACT
In this paper we asses the current state of research on Lean Production and Supply Chain Management in the aeronautic industry, with two basic aims: 1) identify all lines of research developed, providing a classification criterion of literature, 2) discuss the empirical evidence and try to provide guidance for future research. To achieve these objectives, it has employed a research methodology involving the identification and review of the literature. The subsequent systematic analysis of literature has been qualitative. This analysis has identified three lines of research on Lean Production and three on Supply Chain Management. Finally, we identify new opportunities and challenges facing future research.
JEL CLASSIFICATION:
M11
L23
KEY WORDS:
Aeronautic Industry
Lean Production
Supply Chain Management
Literature Review
El Texto completo está disponible en PDF
BIBLIOGRAFÍA
[ABDULMALEK et al., 2006]
F.A. ABDULMALEK, J. RAJGOPAL, K. LASCOLA.
“A Classification Scheme for the Process Industry to Guide the Implementation of Lean”.
Engineering Management Journal, 18 (2006), pp. 15-25
[ABDULMALEK y RAJGOPAL, 2007]
F.A. ABDULMALEK, J. RAJGOPAL.
“Analyzing the benefits of lean manufacturing and value stream mapping via simulation. A process sector case study”.
International Journal of Production Economics, 107 (2007), pp. 223-236
[AKKERMANS et al., 1999]
H. AKKERMANS, P. BOGERD, B. VOS.
“Virtuous and vicious cycles on the road towards international supply chain management”.
International Journal of Operations and Production Management, 19 (1999), pp. 565-581
[AMIT y ZOTT, 2001]
R. AMIT, C. ZOTT.
“Value creation in e-business”.
Strategic Management Journal, 22 (2001), pp. 493-520
[ANDERSON, 1995]
M. ANDERSON.
“The role of collaborative integration in industrial organization: observations from the Canadian aerospace industry”.
Economic Geography, 71 (1995), pp. 55-78
[BALES et al., 2004]
R.R. BALES, R.S. MAULL, Z. RADNOR.
“The development of supply chain management within the aerospace manufacturing sector”.
Supply Chain Management, 9 (2004), pp. 250-255
[BARNEY, 1991]
J.B. BARNEY.
“Firm resources and sustained competitive advantage”.
Journal of Management, 17 (1991), pp. 99-120
[BHASIN y BURCHER, 2006]
S. BHASIN, P. BURCHER.
“Lean viewed as a philosophy”.
Journal of Manufacturing Technology Management, 17 (2006), pp. 56-72
[BHUIYAN et al., 2006]
N. BHUIYAN, A. BAGHEL, J. WILSON.
“A sustainable continuous improvement methodology at an aerospace company”.
International Journal of Productivity and Performance Management, 55 (2006), pp. 671-687
[BOZDOGAN et al., 1998]
K. BOZDOGAN, J. DEYST, D. HOULT, M. LUCAS.
“Architectural innovation in product development through early supplier integration”.
R&D Management, 28 (1998), pp. 163-173
[BROWNING y HEATH, 2009]
T.R. BROWNING, R.D. HEATH.
“Reconceptualizing the effects of lean on production costs with evidence from the F-22 program”.
Journal of Operations Management, 27 (2009), pp. 23-44
[BURCHER et al., 1996]
P. BURCHER, S. DUPERNEX, R. GEOFFREY.
“The road to lean repetitive batch manufacturing: modelling planning system performance”.
International Journal of Operations and Production Management, 16 (1996), pp. 210-221
[CAGLIANO et al., 2006]
R. CAGLIANO, F. CANIATO, G. SPINA.
“The linkage between supply chain integration and manufacturing improvement programmes”.
International Journal of Operations and Production Management, 26 (2006), pp. 282-299
[CARR, 2004]
N.G. CARR.
Does IT matter? Information technology and the corrosion of competitive advantage, Harvard Business School Press, (2004),
[CHAKRAVORTY, 2009]
S.S. CHAKRAVORTY.
“Process Improvement: Using Toyota's A3 Reports”.
The Quality Management Journal, 16 (2009), pp. 7-26
[COMM y MATHAISEL, 2000]
C.L. COMM, D.F.X. MATHAISEL.
“A paradigm for benchmarking lean initiatives for quality improvement”.
Benchmarking, 7 (2000), pp. 118-128
[COONEY, 2002]
R. COONEY.
“Is lean a universal production system? Batch production in the automotive industry”.
International Journal of Operations and Production Management, 22 (2002), pp. 1130-1147
[CRABILL et al., 2000]
J. CRABILL, E. HARMON, D. MEADOWS, R. MILAUSKAS, C. MILLER, D. NIGHTINGALE, B. SCHWARTZ, T. SHIELDS, B. TORRANI.
Production operations level transition-to-lean description manual, Center for Technology, Policy, and Industrial Development. Massachusetts Institute of Technology, (2000),
[CRUTE et al., 2003]
V. CRUTE, Y. WARD, S. BROWN, A. GRAVES.
“Implementing Lean in aerospace–challenging the assumptions and understanding the challenges”.
Technovation, 23 (2003), pp. 917-928
[DEVARAJ et al., 2007]
S. DEVARAJ, L. KRAJEWSKI, J.C. WEI.
“Impact of e-Business technologies on operational performance: the role of production information integration in the supply chain”.
Journal of Operations Management, 25 (2007), pp. 1199-1216
[ELLINGER et al., 2000]
A.E. ELLINGER, P.J. DAUGHERTY, S.B. KELLER.
“The relationship between marketing/logistics interdepartmental integration and performance in US manufacturing firms: an empirical study”.
Journal of Business Logistics, 21 (2000), pp. 1-21
[EMILIANI, 2004]
M.L. EMILIANI.
“Sourcing in the global aerospace supply chain using online reverse auctions”.
Industrial Marketing Management, 33 (2004), pp. 65-72
[ESPEJO y MOYANO, 2007]
M. ESPEJO, J. MOYANO.
“Lean Production: estado actual y desafíos futuros de la investigación”.
Investigaciones Europeas de Dirección y Economía de la Empresa, 13 (2007), pp. 179-202
[EUROPEAN COMMISION, 2001]
EUROPEAN COMMISION.
European Aeronautics: A vision for 2020. Meeting society's needs and winning global leadership.
[FARRIS et al., 2005]
M.T. FARRIS, C.M. WITTMANN, R. HASTY.
“Aftermarket support and the supply chain: Exemplars and implications from the aerospace industry”.
International Journal of Physical Distribution and Logistics Management, 35 (2005), pp. 6-19
[FORTUNY et al., 2008]
J. FORTUNY, L. CUATRECASAS, O. CUATRECASAS, J. OLIVELLA.
“Metodología de implantación de la gestión lean en plantas industriales”.
Universia Business Review, 20 (2008), pp. 28-41
[FREAR y METCALF, 1995]
C.R. FREAR, L.E. METCALF.
“Strategic alliances and technology networks: a study of a cast-products supplier in the aircraft industry”.
International Marketing Management, 24 (1995), pp. 379-390
[FROHLICH y WESTBROOK, 2001]
M.T. FROHLICH, R. WESTBROOK.
“Arcs of integration: an international study of supply chain strategies”.
Journal of Operations Management, 19 (2001), pp. 185-200
[FROHLICH, 2002]
M.T. FROHLICH.
“e-Integration in the supply chain: barriers and performance”.
Decision Sciences, 33 (2002), pp. 537-556
[FULLERTON y WEMPE, 2009]
R. FULLERTON, W.F. WEMPE.
“Lean manufacturing, non-financial performance measures, and financial performance”.
International Journal of Operations and Production Management, 29 (2009), pp. 214-240
[GIDDENS, 2007]
J. GIDDENS.
“Army Aviation Depot Does an About-Face”.
Quality Progress, 40 (2007), pp. 21-25
[GIMÉNEZ y VENTURA, 2005]
C. GIMÉNEZ, E. VENTURA.
“Logistics-production, logistics-marketing and external integration: Their impact on performance”.
International Journal of Operations and Production Management, 25 (2005), pp. 20-38
[GIUNTA, 2000]
A. GIUNTA.
“Large firms and subcontracting relations in the commercial aircraft industry: a case study of Campania in Southern Italy”.
Restructuring Industry and Regions: The Experience of Europe's Regions, pp. 37-56
[GORDON, 2006]
D.K. GORDON.
“Supply Chain Management Remains Aerospace Challenge”.
Quality Progress, 39 (2006), pp. 83-85
[GRANT, 2003]
S.B. GRANT.
“Early supplier involvement in new product development within the UK aerospace industry”.
International Journal of Electronic Business, 1 (2003), pp. 329-346
[GREENWOOD et al., 2002]
T. GREENWOOD, M. BRADFORD, B. GREENE.
“Becoming a lean enterprise: A tale of two firms”.
Strategic Finance, 84 (2002), pp. 32-39
[GULLEDGE, 2002]
T. GULLEDGE.
“B2B eMarketplaces and small-and medium-sized enterprises”.
Computers in Industry, 49 (2002), pp. 47-58
[GUNASEKARAN y NGAI, 2005]
A. GUNASEKARAN, E.W.T. NGAI.
“Build-to-order supply chain management: a literature review and framework for development”.
Journal of Operations Management, 23 (2005), pp. 423-451
[HAUSMAN y STOCK, 2003]
A. HAUSMAN, J.R. STOCK.
“Adoption and implementation of technological innovations within long-term relationship”.
Journal of Business Research, 8 (2003), pp. 681-686
[HINES et al., 2004]
P. HINES, M. HOLWEG, N. RICH.
“Learning to evolve: a review of contemporary lean thinking”.
International Journal of Operations and Production Management, 24 (2004), pp. 994-1011
[HO et al., 2004]
P. HO, A.J.C. TRAPPEY, C.V. TRAPPEY.
“Data interchange services: use of XML hub approach for the aerospace supply chain”.
International Journal of Technology Management, 28 (2004), pp. 227-242
[HOLWEG, 2007]
M. HOLWEG.
“The genealogy of lean production”.
Journal of Operations Management, 25 (2007), pp. 420-437
[HOPP y SPEARMAN, 2004]
W.J. HOPP, M.L. SPEARMAN.
“To pull or not to pull: what is the question?”.
Manufacturing and Service Operations Management, 6 (2004), pp. 133-148
[JAMES-MOORE y GIBBONS, 1997]
S.M. JAMES-MOORE, A. GIBBONS.
“Is lean manufacture universally relevant? An investigative methodology”.
International Journal of Operations and Production Management, 17 (1997), pp. 899-911
[JONES et al., 1997]
D.T. JONES, P. HINES, N. RICH.
“Lean Logistics”.
International Journal of Physical Distribution and Logistics Management, 27 (1997), pp. 153-173
[KRAFCIK, 1988]
J.F. KRAFCIK.
“Triumph of the lean production system”.
Sloan Management Review, 30 (1988), pp. 41-52
[LAFRAMBOISE y REYES, 2007]
K. LAFRAMBOISE, F. REYES.
“The digitization of an aerospace supply network”.
International Journal of Enterprise Information Systems, 3 (2007), pp. 68-89
[LAMBERT et al., 1998]
D. LAMBERT, M. COOPER, J. PUGH.
“Supply Chain Management”.
International Journal of Logistics Management, 9 (1998), pp. 1-19
[LAMMING, 1993]
R. LAMMING.
Beyond Partnership: Strategies for Innovation and Lean Supply, Prentice-Hall, (1993),
[LEFÈBVRE y LEFÈBVRE, 1998]
É. LEFÈBVRE, L. LEFÈBVRE.
“Global strategic benchmarking, critical capabilities and performance of aerospace subcontractors”.
Technovation, 18 (1998), pp. 223-234
[LUMMUS et al., 1998]
R.R. LUMMUS, R.J. VOKURKA, K.L. ALBERT.
“Strategic supply chain planning”.
Production and Inventory Management Journal, 39 (1998), pp. 49-58
[MACDONNELL y CLEGG, 2007]
M. MACDONNELL, B. CLEGG.
“Designing a support system for aerospace maintenance supply chains”.
Journal of Manufacturing Technology Management, 18 (2007), pp. 139-152
[MATHAISEL y COMM, 2000]
D.F.X. MATHAISEL, C.L. COMM.
“Developing, implementing and transferring lean quality initiatives from the aerospace industry to all industries”.
Managing Service Quality, 10 (2000), pp. 248-256
[MATHAISEL, 2005]
D.F.X. MATHAISEL.
“A lean architecture for transforming the aerospace maintenance, repair and overhaul (MRO) enterprise”.
International Journal of Productivity and Performance Management, 54 (2005), pp. 623-644
[MCLACHLIN, 1997]
R. MCLACHLIN.
“Management initiatives and just-in-time manufacturing”.
Journal of Operations Management, 15 (1997), pp. 271-292
[MICHAELS, 1999]
L.M.J. MICHAELS.
“The making of a lean aerospace supply chain”.
Supply Chain Management, 4 (1999), pp. 135-144
[MODARRESS et al., 2005]
B. MODARRESS, A. ANSARI, D.L. LOCKWOOD.
“Kaizen costing for lean manufacturing: a case study”.
International Journal of Production Research, 43 (2005), pp. 1751-1760
[MOORE et al., 2001]
D.M. MOORE, D.J. NEAL, P.D. ANTILL.
“Supply chain management in SMEs within the defence aerospace industry – a case of simplification or increased complexity?”.
International Journal of Aerospace Management, 1 (2001), pp. 35-45
[MURMAN et al., 2002]
E. MURMAN, T. ALLEN, K. BOZDOGAN, J. CUTCHER-GERSHENFELD, H. MCMANUS, D. NIGHTINGALE, E. REBENTISCH, T. SHIELDS, F. STAHL, M. WALTON, J. WARMKESSEL, S. WEISS, S. WINDNALL.
Lean enterprise value: Insights from MIT'S Lean Aerospace Initiative, Palgrave, (2002),
[NARASIMHAN y KIM, 2001]
R. NARASIMHAN, S.W. KIM.
“Information system utilization for supply chain integration”.
Journal of Business Logistics, 22 (2001), pp. 51-75
[NIGHTINGALE y MIZE, 2002]
D.J. NIGHTINGALE, J.H. MIZE.
“Development of a lean enterprise transformation maturity model”.
Information, Knowledge, Systems Management, 3 (2002), pp. 15-30
[NISHIGUCHI, 1987]
T. NISHIGUCHI.
“Competing systems of automotive components supply: an examination of the Japanese-clustered control-model and the Alps structure”.
First Policy Forum IMVP, (1987), pp. 1-26
[O'NEILL y SACKETT, 1994]
H. O'NEILL, P. SACKETT.
“The extended manufacturing enterprise paradigm”.
Management Decision, 32 (1994), pp. 42-49
[O'SULLIVAN, 2003]
A. O'SULLIVAN.
“Dispersed collaboration in a multi-firm, multi-team product-development Project”.
Journal of Engineering and Technology Management, 20 (2003), pp. 93-116
[PAGELL, 2004]
M. PAGELL.
“Understanding the factors that enable and inhibit the integration of operations, purchasing and logistics”.
Journal of Operations Management, 22 (2004), pp. 459-487
[PALIWODA y BONACCORSI, 1994]
S.J. PALIWODA, A.J. BONACCORSI.
“Trends in procurement strategies within the European aircraft industry”.
Industrial Marketing Management, 23 (1994), pp. 236-244
[PARRY y TURNER, 2006]
G.C. PARRY, C.E. TURNER.
“Application of lean visual process management tools”.
Production Planning and Control, 17 (2006), pp. 77-86
[PORTER, 2001]
M. PORTER.
“Strategy and the Internet”.
Harvard Business Review, 80 (2001), pp. 63-78
[POWELL y DENT-MICALLEF, 1997]
T.C. POWELL, A. DENT-MICALLEF.
“Information Technology as competitive advantage: the role of human, business and technology resources”.
Strategic Management Journal, 18 (1997), pp. 375-405
[PRAHALAD y HAMEL, 1990]
C.K. PRAHALAD, G. HAMEL.
“The Core Competences of the Corporation”.
Harvard Business Review, 68 (1990), pp. 79-91
[PRIZINSKY, 2001]
D. PRIZINSKY.
“Lincoln looks leaner in its manufacturing process”.
Crain's Cleveland Business, 22 (2001), pp. 1-8
[REED y WALSH, 2002]
F.M. REED, K. WALSH.
“Enhancing Technological Capability Through Supplier Development: A Study of the U.K. Aerospace Industry”.
IEEE Transactions on Engineering Management, 49 (2002), pp. 231-242
[ROMANO, 2003]
P. ROMANO.
“Co-ordination and integration mechanisms to manage logistics processes across supply markets”.
Journal of Purchasing and Supply Management, 9 (2003), pp. 119-134
[ROSE-ANDERSSEN et al., 2008]
C. ROSE-ANDERSSEN, J.S. BALDWIN, K. RIDGWAY, P.M. ALLEN, L. VARGA.
“Aerospace Supply Chains as Evolutionary Networks of Activities: Innovation via Risk-Sharing Partnerships”.
Creativity and Innovation Management, 17 (2008), pp. 304-318
[ROSE-ANDERSSEN et al., 2009a]
C. ROSE-ANDERSSEN, J.S. BALDWIN, K. RIDGWAY, P.M. ALLEN, L. VARGA, M. STRATHERN.
“A cladistic classification of commercial aerospace supply chain evolution”.
Journal of Manufacturing Technology Management, 20 (2009), pp. 235-257
[ROSE-ANDERSSEN et al., 2009b]
C. ROSE-ANDERSSEN, J.S. BALDWIN, K. RIDGWAY, P.M. ALLEN, L. VARGA.
“Knowledge Transformation, Learning and Changes Giving Competitive Advantage in Aerospace Supply Chains”.
Emergence: Complexity and Organization, 11 (2009), pp. 15-29
[RUSSELL y HOAG, 2004]
D.M. RUSSELL, A.M. HOAG.
“People and information technology in the supply chain”.
International Journal of Physical Distribution and Logistics Management, 34 (2004), pp. 102-122
[SANDERS y PREMUS, 2002]
N.R. SANDERS, R. PREMUS.
“IT applications in supply chain organization: a link between competitive priorities and organization benefits”.
Journal of Business Logistics, 23 (2002), pp. 65-83
[SHAH y WARD, 2003]
R. SHAH, P.T. WARD.
“Lean manufacturing: context, practice bundles and performance”.
Journal of Operations Management, 21 (2003), pp. 129-149
[SHAH y WARD, 2007]
R. SHAH, P.T. WARD.
“Defining and developing measures of lean production”.
Journal of Operations Management, 25 (2007), pp. 785-805
[SINHA et al., 2004]
P.R. SINHA, L.E. WHITMAN, D. MALZAHN.
“Methodology to mitigate supplier risk in an aerospace supply chain”.
Supply Chain Management, 9 (2004), pp. 154-168
[SMITH y TRANFIELD, 2005]
D.J. SMITH, D. TRANFIELD.
“Talented Suppliers? Strategic Change and Innovation in the UK Aerospace Industry”.
R&D Management, 35 (2005), pp. 37-49
[STANK et al., 2001]
T.P. STANK, S.B. KELLER, P.J. DAUGHERTY.
“Supply chain collaboration and logistical service performance”.
Journal of Business Logistics, 22 (2001), pp. 29-48
[STUNDZA, 1999]
T. STUNDZA.
“Aerospace purchasing gets overhauled”.
Purchasing, 126 (1999), pp. 66-70
[TANNOCK et al., 2007]
J. TANNOCK, B. CAO, R. FARR, M. BYRNE.
“Data-driven simulation of the supply chain: Insights from the aerospace sector”.
International Journal of Production Economics, 110 (2007), pp. 70-84
[TROYER y COOPER, 1995]
C. TROYER, R. COOPER.
“Smart moves in supply chain integration”.
Transportation and Distribution, 36 (1995), pp. 55-62
[VAN DER VAART y VAN DONK, 2008]
T. VAN DER VAART, D.P. VAN DONK.
“A critical review of survey-based research in supply chain integration”.
International Journal of Production Economics, 111 (2008), pp. 42-55
[WILLIAMS et al., 2002]
T. WILLIAMS, R. MAULL, B. ELLIS.
“Demand chain management theory: constraints and development from global aerospace supply webs”.
Journal of Operations Management, 20 (2002), pp. 691-706
[WOMACK et al., 1990]
J.P. WOMACK, D.T. JONES, D. ROSS.
The machine that changed the world: The story of Lean Production, MacMillan/Rawson Associates, (1990),
[WOMACK y JONES, 1996]
J.P. WOMACK, D.T. JONES.
Lean Thinking: Banish waste and create wealth in your Corporation, Simon and Schuster, (1996),
[ZSIDISIN y SMITH, 2005]
G.A. ZSIDISIN, M.E. SMITH.
“Managing Supply Risk with Early Supplier Involvement: A Case Study and Research Propositions”.
The Journal of Supply Chain Management, 41 (2005), pp. 44-57
[ZUCKERMAN, 2007]
A. ZUCKERMAN.
“Aerospace-Defense Sector First to Employ Collaborative Supply Chain Platform”.
World Trade, 20 (2007), pp. 52-57
Copyright © 2011. Academia Europea de Dirección y Economía de la Empresa
