Información del artículo
Abstract
The present paper will make a brief review on some of the most relevant through-thickness reinforcement technologies for CFRP/Metal and CFRP/CFRP joints developed so far. A distinction between the traditional (“z-pinning” and “stitching and tufting”) and novel (“COMELDTM”, “CMT”, “HYPER” and “RHEA”) 3D-reinforcement techniques will be made and the most relevant characteristics of each one will be pointed out.
Keywords:
CFRP
joints/joining
z-reinforcement
damage tolerance
El Texto completo está disponible en PDF
References
[1]
M.T. von Hafe P.F. da Silva, CFRP/Metal Hybrid Joining Technologies, unpublished report, Faculdade de Engenharia da Universidade do Porto, Porto, Portugal (2015).
[2]
F. Smith, G. Wylde.
Weld. Cutting, 4 (2005), pp. 182
[3]
A. Fink, et al.
Compos. Sci. Technol., 70 (2010), pp. 305
[4]
M. Juergens et al. Proceedings of ECCM16-16th European Conference on Composite Materials, Seville, Spain, June 22-26, 2014.
[5]
A. Mouritz, B. Cox.
Composites.
Part A, 31 (2000), pp. 1
[6]
A.C. Nogueira, PhD thesis, Technical University of Munich, Germany, 2015.
[7]
C. Sickinger, A. Herrmann.
Proceedings of TechTextil Symposium.
Frankfurt am Main,
[8]
G. Dell’Anno, et al.
Composites Part A, 38 (2007), pp. 2366
[9]
D.D. Cartié, et al.
Eng. Fract. Mech., 73 (2006), pp. 2532
[10]
F. Larsson.
Composites Part A, 28 (1997), pp. 923
[11]
K.A. Dransfield, L.K. Jain, Y.-W. Mai.
Compos. Sci. Technol., 58 (1998), pp. 815
[12]
L.K. Jain, K.A. Dransfield, Y.-W. Mai.
Compos. Sci. Technol., 58 (1998), pp. 829
[13]
A.P. Mouritz.
Composites Part A, 38 (2007), pp. 2383
[14]
P. Chang, A.P. Mouritz, B.N. Cox.
Composites Part A, 37 (2006), pp. 1501
[15]
D.D. Cartié, M. Troulis, I.K. Partridge.
Compos. Sci. Technol., 66 (2006), pp. 855
[16]
X. Zhang, L. Hounslow, M. Grassi.
Compos. Sci. Technol., 66 (2006), pp. 2785
[17]
L. Dickinson, G. Farley, M. Hinders.
J. Compos. Mater, 33 (1999), pp. 1002
[18]
W. Tu, F. Guild, P. Hogg.
Rare Met. Mater. Eng., 38 (2009), pp. 134
[19]
S. Ucsnik, et al.
Composites Part A, 41 (2010), pp. 369
[20]
J. Blackburn, J.P. Hilton.
Phys. Procedia, 12 (2011), pp. 529
[21]
W. Tu, et al.
Compos. Sci. Technol., 71 (2011), pp. 868
[22]
H. Zhang, et al.
Composites Part B.
, 43 (2012), pp. 3310
[23]
J. Feng, H. Zhang, P. He.
Mater. Des., 30 (2009), pp. 1850
[24]
P. Parkes, et al.
Compos. Struct., 118 (2014), pp. 250
[25]
P. Parkes, R. Butler, D. Almond.
Proceedings of Proceedings of ECCM15-15th European Conference on Composite Materials,
[26]
P.N. Parkes, R. Butler, D.P. Almond.
Proceedings of 54th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference,
[27]
M. Juergens, et al.
Proceedings of ICCM20-20th International Conference on Composite Materials,
[28]
M. Juergens, et al.
Proceedings of the Society for the Advancement of Material and Process Engineering Conference,
[29]
A. Kurtovic, et al.
Int. J. Adhes. Adhes., 45 (2013), pp. 112
Copyright © 2017. Portuguese Society of Materials (SPM)
