Información del artículo
Abstract
The literature presents several results referring to multiaxial tests of stress concentrators specimens. Different types of these specimens are presented and they were used accordingly to the stress triaxiality as follows: butterfly specimen for high degree of stress triaxiality, plane specimen for medium state of triaxiality and cylindrical specimen for low degree of triaxiality. This article shows the results of experimental determinations, finite element analysis and theoretical study of two types of plate specimens with stress concentrators and it aims to obtain high stress state in failure section (volume), more uniform stress distribution and stress ratio to be constant until failure.
Keywords:
Triaxiality degree
finite element analysis
specimens with stress concentrators
El Texto completo está disponible en PDF
References
[1]
L. Malcher, F.M. Andrade Pires, J.M.A. César de Sá.
Int. J. Plast., 30–31 (2012), pp. 81
[2]
M. Dunand, D. Mohr.
J. Mech. Phys. Solids., 59 (2011), pp. 1374
[3]
L. Malcher, E.N. Mamiya.
Int. J. Plast., 56 (2014), pp. 232
[4]
V.P. Lamashevskii, A.A. Lebedev, P.T. Alfimov, Experimental examination of the scale effect in deformation of grey cast iron in a multiaxial stress state, Institute of Strength Problems, Academy of Sciences of the Ukrainian SSR, Kiev, Ukrainia, Translated from Problemy Prochnosti 2 (1987) 32.
[5]
B. Erice, F. Gálvez.
Int. J. Solids Struct., 51 (2014), pp. 93
[6]
Y. Bao, T. Wierzbicki.
Int. J. Mech. Sci., 46 (2004), pp. 81
[7]
X. Gao, T. Zhang, M. Hayden, C. Roe.
Int. J. Plast., 25 (2009), pp. 2366
[8]
Y. Lou, H. Huh.
J. Mater. Process. Technol., 213 (2013), pp. 1284
[9]
P. Allen, MSc thesis, Tennessee Technological University, USA, 2000.
Copyright © 2017. Portuguese Society of Materials (SPM)
