Información del artículo
Abstract
Reciprocating sliding tests were performed in order to find the effect of lubricant properties and other variables on the coefficient of friction of the steel sheets “Cold Rolled HSLA 380” in dry and lubricated conditions. For this material, tribology tests were performed with different lubricants. Test results showed that values of the coefficient of friction presented different patterns. The coefficient of friction varies over a wide range with different lubricating conditions and different sliding velocities. For some sliding velocities, the coefficient of friction is stable and lower, while for others it is unstable and higher.
Keywords:
Friction
pressure
sliding velocity
sheet metal forming
lubricant
steel
El Texto completo está disponible en PDF
References
[1]
B.H. Lee, Y.T. Keum, R.H. Wagoner.
J. Mater. Process. Technol., 130–131 (2002), pp. 60
[2]
E. Ceretti, A. Fiorentino, C. Giardini.
Int. J. Mat. Form., 1 (2008), pp. 1219
[3]
T. Mang, W. Dresel.
Lubricants and Lubrication.
2nd ed., Wiley-VCH Verlag GmbH & Co. KGaA, (2007),
[4]
S. Aleksandrovich, M. Stefanovic, T. Vujinovic.
Tribol. Ind., 25 (2003), pp. 100
[5]
I. Buyanovskii.
J. Frict. W, 31 (2010), pp. 33
[6]
Steel Express, D2 Steel Properties, 2016 < http://www.steelexpress.co.uk/toolsteel/D2-Steelproperties.html> (accessed 29.06.2015).
[7]
Bharat Bhushan.
Introduction to Tribology.
2nd ed., John Wiley & Sons, Ltd, (2013),
[8]
T. Trzepieciński, A. Bazan, H.G. Lemu.
Int. J. Automot. Technol., 16 (2015), pp. 849
[9]
E. Ghassemieh.
New Trends and Developments in Automotive Industry, pp. 365-394
[10]
A.K. Padap, G.P. Chaudhari, S.K. Nath . Dry Sliding Wear and Corrosion Behavior of Ultrafine-grained HSLA Steel Processed using Multi Axial Forging, in Supplemental Proceedings: Materials Fabrication, Properties, Characterization, and Modeling, vol. 2, John Wiley & Sons, Inc., Hoboken, NJ, USA, 2011.
Copyright © 2017. Portuguese Society of Materials (SPM)
