Información del artículo
Resumen
Este artículo describe la obtención y validación de un modelo de predicción energética para el hotel Meliá Habana de la ciudad Habana en Cuba. El modelo obtenido emplea el método de series de tiempo radiantes para la determinación de la carga térmica de los bloques habitacionales de la instalación. El modelo es implementado en el lenguaje de programación MatLab®. La validación experimental del modelo se realiza con mediciones reales del consumo energético diario del hotel. El valor de uso del modelo obtenido es apreciable para estudios de comportamiento energético y para la implementación de estrategias avanzadas de control.
Palabras clave:
Modelado
Control de la Energía
Coeficientes de Temperatura
Validación
El Texto completo está disponible en PDF
Referencias
[Acosta y González, 2007]
Acosta CA, González A. I., 2007. Primera aproximación a un modelo de predicciones energéticas de habitación hotelera. Simposio CIE 2007. Santa Clara, Cuba.
[Acosta et al., 2008a]
Acosta C.A., A.I. González and V. Castelló, 2008a. Obtención de un modelo de predicciones energéticas de habitación hotelera. Conferencia FIE2008. Santiago de Cuba, Cuba.
[Acosta et al., 2008b]
C.A. Acosta, A.I. González, J.M. Zamarreño, V. Castelló.
A model for energy predictions of a hotel room.
20th European Modeling and Simulation Symposium. (Simulation in Industry),
[ASHRAE, 1997]
ASHRAE, 1997. ASHRAE Handbook. Chapter 28, Nonresidential cooling and heating load calculation procedures. ASHRAE Handbook Editor.
[ASHRAE, 2005a]
ASHRAE, 2005a. ASHRAE Handbook. Chapter 30, Nonresidential cooling and heating load calculation procedures. ASHRAE Handbook Editor.
[ASHRAE, 2005b]
ASHRAE, 2005b ASHRAE Handbook. Chapter 32, Energy Estimating and modeling methods. ASHRAE Handbook Editor.
[ASHRAE, 2007]
ASHRAE. 2007. ASHRAE Handbook. Chapter 5, Hotels, Motels, and Dormitories. ASHRAE Handbook Editor.
[ASHRAE, 2009]
ASHRAE. 2009. ASHRAE Handbook. Chapter 15, Fenestration. ASHRAE Handbook Editor.
[Budaiwi, 2003]
Budaiwi I.M,. 2003. Air conditioning system operation strategies for intermittent occupancy building in a hot -sumid climate. King Fahd University of petroleum and minerals architectural, Engineering Department. Proceedings: Building Simulation 2007.
[Castilla et al., 2010]
M.M. Castilla, J.D. Alvarez, M. Berenguel, M. Pérez, F. Rodríguez, J.L. Guzmán.
Técnicas de control del confort en edificios.
RIAI, 7 (2010), pp. 5-24
[Crawley et al., 2001]
D.B. Crawley, L.K. Lawrie, F.C. Winkelmann, W.F. Buhl, Y. Joe Huang, C.O. Pedersen, R.K. Strand, R.J. Liesen, D.E. Fisher, M.J. Witte, J. Glazer.
EnergyPlus: Creating a new-generation building energy simulation program.
Energy and Buildings, 33 (2001), pp. 319-331
[Li et al., 2009]
D. Li, T. Lam, W. Chan, A. Mak.
Energy and cost analysis of semi-transparent photovoltaic in office buildings.
Applied Energy, 19 (2009), pp. 722-729
[Gugliermetti et al., 2004]
F. Gugliermetti, G. Passerini, F. Bisegna.
Climate models for the assessment of office buildings energy performance.
Building and Environment, 39 (2004), pp. 39-50
[Fangting Song et al., 2007]
Fangting Song, Yi Jiang, Anne Le Mouel, Jean-Jacques Roux.
Development of a data model for energy consumption analysis and prediction of large-scale commercial buildings.
Proceedings: Building Simulation, (2007), pp. 1601
[Fumio Sakurai et al., 2007]
Fumio Sakurai, Dr. Tatsuo Inooka, Dr. Ryuji Yanagihara, Etsuo Higashizawa, Junya Hamane, Tatsuo Fujii, Hisashi Nishihata, Hideto Hayashi, Fumihiro Arizumi, Hiroshi Ninomiya, Kazusa Koike and Naoko Shinohara, 2007. FACES (Forecast of air-conditioning system's energy, environmental, and economical, performance by simulation). Proceedings: Building Simulation 2007. Japan.
[González Santos, 1996]
González Santos AI. 1996. Sistema de regulación automático para controlar el índice de confort en ambientes climatizados. Tesis de Maestría en Automática, ISPJAE. Cuba.
[Hernández y Sanzovo Fiorelli, 2007]
N.A. Hernández, F.A. Sanzovo Fiorelli.
Use of simulation tools for managing buildings energy demand.
Proceedings: Building Simulation Conference, (2007), pp. 1883
[Hittle, 1999]
D.C. Hittle.
The effect of beam solar radiation on peak cooling loads.
ASHRAE Transactions, 105 (1999), pp. 510-513
[Ip Seng Iu, 2002]
Ip Seng Iu., 2002. Experimental validation of the radiant time series method for cooling load calculations. Thesis of the Degree of Master of Science. Oklahoma State University.
[Iu y Pisen Calvin, 2004]
Iu, Pisen Calvin, 2004. PRF/RTF Generator Software. www.hvac.okstate.edu.
[Ljung, 1999]
Ljung Lennart.
System Identification theory for the user.
2nd edition, Prentice Hall, (1999),
[Aktacir et al., 2008]
M.A. Aktacir, O. Büyükalaca, H. Bulut, T. Yılmaz.
Influence of different outdoor design conditions on design cooling load and design capacities of air conditioning equipments.
Energy Conversion and Management, 49 (2008), pp. 1766-1773
[MathWorks, 2007]
MathWorks, 2007. Matlab 7.4.0. Ayuda de la herramienta, versión 7.0.
[McQuiston y Spitler, 1992]
McQuiston, F.C. and J.D. Spitler, 1992. Cooling and heating load calculation manual. 2nd ed. ASHRAE.
[Cui y Chen, 2009]
Mingxian Cui and Tingyao Chen, 2009. A revised radiant time series (RTS) method for intermittent cooling load calculation Eleventh International IBPSA Conference. Glasgow, Scotland.
[Botsaris y Spyridon, 2004]
Pantelis N. Botsaris, Spyridon Prebezanos.
A methodology for a thermal energy building audit.
Building and Environment, 39 (2004), pp. 195-199
[Pedrini et al., 2002]
Pedrini, F.S. Westphal, R. Lamberts.
A methodology for building energy modeling and calibration in warm climates.
Building and Environment, 37 (2002), pp. 903-912
[Chirarattananon y Taveekun, 2004]
S. Chirarattananon, J. Taveekun.
An OTTV-based energy estimation model for commercial buildings in Thailand.
Energy and Buildings, 36 (2004), pp. 680-689
[Sowell, 1988]
E.F. Sowell.
Cross-check and modification of the DOE-2 program for calculation of zone weighting factors.
ASHRAE Transactions, 94 (1988), pp. 737-753
[Spitler y Fisher., 1999]
J.D. Spitler, D.E. Fisher.
Development of periodic response factors for use with the radiant time series method.
ASHRAE Transactions, 105 (1999),
[Chen y Cui, 2010]
T. Chen, M. Cui.
A RTS-based method for direct and consistent calculating intermittent peak cooling loads.
Energy Conversion and Management, 51 (2010), pp. 1170-1178
[Trott y Welch, 2000]
Trott A. R. and Welch T, 2000. Refrigeration and air-conditioning. Third edition by Butterworth-Heinemann.
[US Army, 1979]
U.S. Army, 1979. BLAST, the building loads analysis and system thermodynamics program—Users manual. U.S. Army Construction Engineering Research Laboratory Report E-153.l.
[US Department of Energy, 2005]
US Department of Energy, 2005. ENERGYPLUSTM, Input Output Reference.
[Westphal y Lamberts, 2005]
F.S. Westphal, R. Lamberts.
Building Simulation Calibration Using Sensitivity Analysis.
9th International IBPSA Conference, August,
[Pan et al., 2006]
Y. Pan, Z. Huang, G. Wu, C. Chen.
The application of building energy simulation and calibration in two high rise commercial buildings in Shangai.
Proceedings: Building Simulation Conference 2007, pp. 1889
[Yik et al., 2001]
F.W.H. Yik, J. Burnett, I. Prescott.
Predicting air-conditioning energy consumption of a group of buildings using different heat rejection methods.
Energy and Buildings, 33 (2001), pp. 151-166
[York y Cappiello, 1982]
York D.A. and C.C. Cappiello, eds, 1982. DOE-2 engineers manual. Lawrence Berkeley Laboratory Report LBL-11353 (LA-8520-M, DE83004575). National Technical Information Services, Springfield, VA.