[Alba et al., 2005]Alba, O. Wenger, P. y. P. J., 2005. Consistent kinetostatic indices for planar 3-dof parallel manipulators, application to the optimal kinematic inversion. In: Proceedings of the ASME DETC. pp. 765-774.
[Angeles, 2007]Angeles, J., 2007. Fundamentals of Robotic Mechanical Systems, Theory, Methods, and Algorithms. Springer.
[Asada, 1983]H. Asada.
A geometrical representation of manipulator dynamics and its application to arm design, Journal of Dynamic Systems.
Measurement, and Control, 150 (1983), pp. 131-142
[Baron, 2000]Baron, L., May 2000. A joint-limit avoidance strategy for arc-welding robots. In: International Conference on Integrated Design and Manufacturing in Mechanical Engineering.
[Baron and Bernier, 2001]Baron L. y Bernier, G., 2001. The design of parallel manipulators of star topology under isotropic constraint. In: Proc. DETC ASME.
[Bestard and Wiens, 2007]Bestard, J. y Wiens, G., Jun. 2007. Manipulability based path and trajectory planning for hybrid mobility climbing. In: 12th IFToMM World Congress.
[Bicchi et al., 1995]A. Bicchi, C.B.D. Melchiorri.
On the mobility and manipulability of general multiple limb robots.
IEEE Transactions on Robotics and Automation, 11 (1995), pp. 215-228
[Bonev and Ryu, 2001]I. Bonev, J. Ryu.
A new approach to orientation workspace analysis of 6-dof parallel manipulators.
Trans. ASME, Journal of Mechanical Design, 36 (2001), pp. 15-28
[Carretero and N¿ ahon, 2000]J. Carretero, M.P.R. N¿ ahon.
Workspace analysis and optimization of a novel 3-dof parallel manipulator.
International Journal of Robotics and Automation, 15 (2000), pp. 178-188
[Chablat and Wenger, 2003]D. Chablat, P. Wenger.
Architecture optimization of a 3-dof parallel mechanism for machining applications, the orthoglide.
IEEE Transactions on Robotics and Automation, 19 (2003), pp. 403-410
[Chablat et al., 2002]Chablat, D. Wenger, P.C. S. y. A. J., 2002. The isoconditioning loci of planar three-dof parallel manipulators. In: Proc. DETC ASME.
[Chablat et al., 1998a]Chablat, D. Wenger, P. y. A. J., 1998a. The isoconditioning loci of a class of closed-chain manipulators. In: Proc. IEEE International Conference on Robotics and Automation. pp. 1970-1976.
[Chablat et al., 1998b]Chablat, D. Wenger, P. y. A. J., 1998b. Working modes and aspects in fullyparallel manipulators. In: Proc. IEEE International Conference on Robotics and Automation. pp. 1964-1969.
[Chiu, 1988]S. Chiu.
Task compatibility of manipulator postures.
The International Journal of Robotics Research, 7 (1988), pp. 13-21
[Di Gregorio, 2006]R. Di Gregorio.
Dynamic model and performances of 2-dof manipulators.
Robotica, 24 (2006), pp. 51-60
[Doty et al., 1993]K. Doty, C.B.C. Melchiorri.
A theory of generalized inverse applied to robotics.
Int. J. Robot. Res, 12 (1993), pp. 1-19
[Gosselin, 1990a]Gosselin, C., 1990a. Dexterity indices for planar and spatial robotic manipulators. In: IEEE International Conference on Robotics and Automation. pp. 650-655 vol.1.
[Gosselin and y., 1990b]C.A.J. Gosselin.
Kinematic inversion of parallel manipulators in the presence of incompletely specified tasks.
ASME J. Mechanical Design, 112 (1990), pp. 494-500
[Gosselin and Angeles, 1991]C. Gosselin, J. Angeles.
A global performance index for the kinematic optimization of robotic manipulators.
J. Mech. Des., 113 (1991), pp. 220-226
[Graettinger and Krogh, 1988]T. Graettinger, B. Krogh.
The acceleration radius: a global performance measure for robotic manipulators, Journal of Dynamic Systems.
Measurement, and Control, 4 (1988), pp. 60-69
[Huang and Whitehouse, 1998]T. Huang, D. Whitehouse.
Local dexterity, optimal architecture and optimal design of parallel machine tools.
Ann. CIRP, 47 (1998), pp. 347-351
[Huang et al., 2004]Huang, T. Li, M.L. Z. C. D. y. W. D., 2004. Optimal kinematic design of 2-dof parallel manipulators with well-shaped workspace bounded by a specified conditioning index. IEEE Transactions on Robotics and Automation 20 (3), 538-543.
[Huo and Baron, 2011]The self-adaptation of weights for joint-limits and singularity avoidances of functionally redundant robotic-task. Robotics and Computer-Integrated Manufacturing, 27 (2011), pp. 367-376
[Khatib and Burdick, 1987]Optimization of dynamics in manipulator design: The operational space formulation. The International Journal of Robotics and Automation, 2 (1987), pp. 90-98
[Khatib, 1980]Khatib, O., 1980. Commande dynamique dans l’espace operational des robots manipulateurs en presence d’obstacles. Ph.D. thesis, Ecole Nationale Superieure de lAeronautique et de L’Espace, Touluse, France.
[Kim and Ryu, 2003]S. Kim, J. Ryu.
New dimensionally homogeneous jacobian matrix formulation by three end-effector points for optimal design of parallel manipulators.
IEEE Transactions on Robotics and Automation, 19 (2003), pp. 731-737
[Klein and Blaho, 1987]C. Klein, B. Blaho.
Dexterity measures for the design and control of kinematically redundant manipulators.
International Journal of Robotics Research, 6 (1987), pp. 72-83
[Kumar and Waldron, 1985]A. Kumar, K. Waldron.
The workspaces of a mechanical manipulator.
Trans. ASME, Journal of Mechanical Design, 4 (1985), pp. 3-9
[Li and Sastry, 1988]Z. Li, S. Sastry.
Task-oriented optimal grasping by multifingered robot hands.
IEEE Journal of Robotics and Automation, 4 (1988), pp. 32-44
[Li et al., 2010]J. Li, S.W.X.H.C. Wang.
Optimization of a novel mechanism for a minimally invasive surgery robot.
Int. J. Med. Robotics Comput. Assist. Surg., 6 (2010), pp. 8390
[Li and Huang, 2005]M. Li, T.Z.D. Huang.
Conceptual design and dimensional synthesis of a reconfigurable hybrid robot.
ASME J Manufact Sci Eng, 127 (2005), pp. 647-653
[Liegeois, 1977]A. Liegeois.
Automatic supervisory control of the configuration and behavior of multibody mechanisms.
IEEE Transactions on Systems, Man and Cybernetics, 7 (1977), pp. 868-871
[Lipkin and Du_y, 1989]H. Lipkin, J. Du_y.
Hybrid twist and wrench control of a robotic manipulator.
ASME J. Mechanisms Transmissions Automation Des., 110 (1989), pp. 110-144
[Ma and Angeles, 1991a]Ma, O. y Angeles, J., 1991a. The concept of dynamic isotropy and its applications to inverse kinematics and trajectory planning. In: Proceedings 1991 IEEE International Conference on Robotics and Automation.
[Ma and Angeles, 1991b]Ma, O. y Angeles, J., 1991b. Optimum architecture design of platform manipulators. In: Fifth International Conference on Advanced Robotics, 1991 Robots in Unstructured Environments’. pp. 1130-1135 vol.2.
[Merlet, 2007]Merlet, J., 2007. Jacobian, manipulability, condition number and accuracy of parallel robots. In: Robotics Research. Vol. 28. pp. 175-184.
[Moreno and Pamanes, 2011]Moreno, H.A. y Pamanes, J., 2011. Isotropic design of a 2 dof parallel kinematic machine with a translational workpiece table. In: 13th IFToMMWorld Congress in Mechanism and Machine Science.
[Moreno et al., 2006]Moreno, H. Pamanes, J.W. P. y. C. D., 2006. Global optimization of performance of a 2prr parallel manipulator for cooperative tasks. In: ICINCORA’ 06. pp. 516-522.
[Moreno et al., 2010]Moreno, H. Saltaren, R.P. J. y. A. R., 2010. Motion strategy for the climbing robot on a metallic orthogonal structure. In: Proceedings of the 13th International Conference on Climbing and Walking Robots. pp. 1161-1168.
[Pamanes and Zeghloul, 1991]Pamanes, A. y Zeghloul, S., Apr. 1991. Optimal placement of robotic manipulators using multiple kinematic criteria. In: Robotics and Automation, 1991. Proceedings., 1991 IEEE International Conference on. pp. 933-938 vol.1.
[Park and Kim, 1998]F. Park, J. Kim.
Manipulability of closed kinematic chains.
J. Mech. Des., 120 (1998), pp. 542-548
[Pámanes, 1992]Pámanes, J., 1992. Contribution à l’étude de l’accessibilité aux tâches et à la détermination du placement optimal de robots manipulateurs. Ph.D. thesis, Université de Poitiers, Poitiers, France.
[Salisbury and Craig, 1982]K. Salisbury, J. Craig.
Articulated hands: force and kinematic issues.
The Int. J. of Robotic Research, 1 (1982), pp. 4-17
[Saltaren et al., 2007]R. Saltaren, J.M. Sabater, E. Yime, J.M. Azorin, R. Aracil, N. Garcia.
Performance evaluation of spherical parallel platforms for humanoid robots.
Robotica, 25 (2007), pp. 257-267
[Ueberle et al., 2004]Ueberle, M., Mock, N., Buss, M., 2004. Vishard10, a novel hyper-redundant haptic interface. In: Proceedings of the 12th International Symposium on Haptic Interfaces for Virtual Environment and Teleoperator Systems. pp. 58-65.
[Voglewede and Ebert-Upho_, 2004]Voglewede, P. y Ebert-Upho_, I., 2004. Measuring closenessto singularities for parallel manipulators. In: Proc. IEEE International Conference on Robotics and Automation. pp. 4539-4544.
[Wen and Wilfinger, 1999]J.T.-Y. Wen, L. Wilfinger.
Kinematic manipulability of general constrained rigid multibody systems.
IEEE Transactions on Robotics and Automation, 15 (1999), pp. 558-567
[Yoshikawa, 1985a]Yoshikawa, T., 1985a. Dynamic manipulability of robot manipulators. In: Proceedings of the IEEE International Conference on Robotics and Automation. pp. 1033-1038.
[Yoshikawa, 1985b]T. Yoshikawa.
Manipulability of robotic mechanisms.
The International Journal of Robotics Research, 4 (1985), pp. 3-9
[Zanganeh and Angeles, 1997]K. Zanganeh, J. Angeles.
Kinematic isotropy and the optimum design of parallel manipulators.
Int. J. Robot. Res., 16 (1997), pp. 185-197
